FIRESURE 1

FIRESURE 1 1.5 BROWN 100 MTR RLS

These cables are suitable for use in fixed installations in industrial areas, buildings and similar applications, where the maintenance of power supply during a fire is required for a defined period of time. Particularly suitable for locations where a defined level of resistance to fire and a low level of emission of smoke and corrosive gases are required when the cable is affected by fire or burning. For use where special fire performance is necessary or where local conditions or regulations require increased levels of public safety.

SKU: FS11.5BR100

Reference: 10537753

Product Group: FIRESURE 1

Supplier: Doncaster Cables

Contact Sales

Certifications & Standards

Quick Facts

SKU

FS11.5BR100

Reference

10537753

Product Group

FIRESURE 1

Specifications

Technical Specifications

Weight

22.86

Unit

1000

Number of conductors

Conductor Size

1.5

Construction

Plain Annealed Copper Conductors /Mineral Ceramic (Mica) Tape / Cross Linked Low Smoke Non Halogen (LSNH) Insulation. 450/700V.

Standard

BS 8592

Table / Clause

Table 2

Conductor

Plain Annealed Copper Class 2 BS EN 60228

Insulation

Cross Linked 90°c Thermosetting LSNH Type EI5 to BE En 50363-5 / BS8592

Voltage Rating

450/700V

Minimum Operating Temperature

-15°C

Maximum Operating Temperature

90°C

Minimum Bending Radius

6 x diameter

Colour

Brown

Reel Dimensions (mm)

165x165x100

Current Ratings

For current ratings refer to table 4E1A of BS7671 IEE Wiring Regulations.

Current Rating (In Air (A))

Table 4E1A of BS7671 IEE Wiring Regulations Reference Method F

Nominal Stranding of Conductor (mm)

7/0.53

Nominal Radial Thickness of Insulation (mm)

0.7

Insulation Od. (mm±0.15)

3.4

Approximate Overall Diameter (mm)

3.4

Approximate Weight (kg/km)

Cable Types

FIRE PERFORMANCE SINGLE

Meterage of each Component

100 Metres

Conductor Class to BS EN 60228

Class 2

Bullet1

Manufactured in the UK

Bullet2

Manufactured with 100% renewable energy

Bullet3

Uses materials and manufacturing techniques designed to make the electricians life easier

Bullet4

BASEC Approved

Bullet5

LPCB Approved

Overview:

Firesure 1 is a Fire Resistant Single Core Cable manufactured by Doncaster Cables in the United Kingdom and is for use in emergency safety circuits to maintain circuit integrity under fire conditions. Firesure 1 has obtained approval from the British Approvals Service for Cables (BASEC). The cables are certified as fire resistant through compliance to BS8592:2016 (up to and including 70mm²). BS8592:2016 includes fire testing in accordance with IEC 60331-3, this test specifies that the cables maintain circuit integrity under fire conditions for 120 minutes (2 hour rating). In addition to BS8592:2016 requirements, Firesure 1 has been tested in accordance with BS6387:2013 and achieved rating ‘CAT CWZ’. Cat C = resistance to fire alone, 3 hours at 950°C. Cat W = Resistance to fire with water spray. Cat Z = Resistance to fire with mechanical shock). Our Firesure 1 Range is designed for laying in metallic conduit or in cable trunking where electrical circuit integrity under fire circumstances is of the upmost importance. Firesure 1 is tested in accordance with BS EN 60754-1 (determination of halogen acid gas content) – as there is no halogen or acidic gas emission during fire/burning conditions, any sensitive equipment in surrounding areas are not affected adversely. Firesure 1 is tested in accordance with BS EN 61034-2 (measurement of smoke density of cables burning under defined conditions) – low smoke generation allows better visibility in fire/burning conditions. This increased visibility can be essential to allow emergency evacuations and to help fire fighters in any rescue operations.

No specifications found matching ""